Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 6.0 hpsmdb Backup/Restore & Upgrade procedures

 
Highlighted
Occasional Contributor

HP SIM 6.0 hpsmdb Backup/Restore & Upgrade procedures

I need a procedure with correct syntax to backup and restore the hpsmdb database for HP SIM 6.0 on an HP-UX CMS. Also would like a complete set of upgrade instructions with correct syntax from HP SIM 5.3 to 6.0. Thanks.
2 REPLIES 2
Highlighted
Honored Contributor

Re: HP SIM 6.0 hpsmdb Backup/Restore & Upgrade procedures

Hi

Have you checked the following Doc for backuping and restoring DB in a HP UX environnment?
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01651703/c01651703.pdf

Concerning the Upgrafe : the installation guide also treats the subjetc :
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02052149/c02052149.pdf

hope it helps

fred
“Life is pleasant. Death is peaceful. It's the transition that's troublesome.” Isaac Asimov
Highlighted
Occasional Contributor

Re: HP SIM 6.0 hpsmdb Backup/Restore & Upgrade procedures

Thanks for trying, but I had indeed found the whitepaper, which is outdated, although useful as a starting point for getting a pg_dump syntax that didn't error, but the restore is a no-op. The pg_dump syntax in the 6.0 install guide you referenced is wrong, and the manual pointed to by website in the install guide for the restore has nothing about restoring in it.