HP SMH shows no information

[John Oliver3]

I installed SMH on a Proliant DL380G3 running CentOS, and that works beautifully. But installations on three DL380G3s and one DL360G3, all running W2K or W2K3 do not return any useful info. When I go to the SMH homepage, I'm logged in as some anonymous user, the system type is unknown, etc. How do I get SMH working properly, where I see the "Management Processor", "Recovery", "Storage", "Systtem", and "Utilization" items, and so that Insight Manager can tell what kind of systems they are, etc?

[David Claypool]

Most likely your snmp.conf file is not set up properly. Run 'hpasm reconfigure' and follow the prompts.

[John Oliver3]

As I was poking around, ir ealized that SNMP config was indeed the problem. That isn't so obvious on Windows though :-(

[hesam]

I installed SMH on a Proliant DL360G4 running CentOS 5.4, in client browser i type https://myserverip:2381 and mangement home page open but When I log in with root username and password that belong to my server it is open but the system type is unknown, etc. How do I get SMH working properly, where I see the "Management Processor", "Recovery", "Storage", "Systtem", and "Utilization" items, and so that Insight Manager can tell what kind of systems they are, etc?
before that i install psp 8.25.18 for centos 5 and my snmpd service is runing what is the problem ?