HPSIM 4.1 - MIBs

[Annette Jones_2]

All,

Which mib controls the alerts for server disk problems, it seems that we are not getting alerts of disk!!!

Thanks

A

[Rob Buxton]

The agent would need to send the SNMP Trap for the alert. So, you'd need to check at the Server end not at HPSIM.
Check you have the latest firmware etc. on the Array controller and on the drives themselves.

Check your HPSIM settings to see if you accept unregistered traps.
That way, even if you do not have the MIB to decode the trap, you'll still at least get an event.

[Annette Jones_2]

SNMP is fine, cause I get alerts for everything else, just seems unusal I don't get any disk alerts.

I thought maybe that I had not set one of the mibs correctly, an dthrough the managed tasks may have stopped them unintentionally that's why I wanted to nkwo what mib is used.

Regards
A