HPSIM

[nightwich]

Hi,

I have HPSIM 5.2 SP2.
I have ESXi3.5 Update4 and ESXi4.0 that I download from HP site: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM06

But I can't integrate none of this hosts with my HPSIM, the server stay in the "unmanaged" state.

I try the WBEM authentication but I get the error:

Running WBEM rules based identification.
Cannot get ComputerSystem WBEM/WMI data from the system
Running VM Identification
The system is not a VMware ESX Host, or WBEM credentials may not be specified, s
kipping VM Identification
Running WS-Man identification.
The system did not respond to WS-Management, verify credentials.


What I need to do, to accomplish this.

Regards.

[Daniel Leblanc]

What did you do to try to make it work.

Did you install in the linux of the WMware to see it....?

i use SNMP for this here.

Dan

[nightwich]

Hi Daniel,

I try ESXi update 1 with snmp enable, ESX version from HP etc.. nothing work.

The last try was the version from ESXi 4.0 with HP providers from VMware and it worked ( using webem in HPSIM 5.2 SP2 )in a BL 460 c G1.

Althought I install the same version of the ESXi downloaded from vmware in a DL 380 G4 and the HPSIM don't recognize the host stays "unmanaged".

I thing the only question here is the hardware version where de ESXi is installed ( DL 380 G 4 is not supported from vmware to run ESXi 4.0 )

I'am I right or I'am missing anything ?.

Thanks for the reply.