identifying and having lots of informations in hpsim

[WALKENAERE Sébastien]

If a system is unmanaged by HPSIM because it works with novell servers, can i have some informations on hpsim ? or must i launch a connection on my servers to hp insight agents.

[David Claypool]

There are Insight agents for ProLiant servers running NetWare. Is this what you mean?

[WALKENAERE Sébastien]

i have always installed insight agents for proliants and hpsim say to me that my systems are unmanaged and that's all the informations that it give to me except if i connect to hp agent on my servers.

[Rob Buxton]

Unmanaged means that HPSIM cannot communicate with the Client Server.

Typically this is down to SNMP. You need to configure SNMP to allow the HPSIM Server access and have a Community Name common to the two.

[WALKENAERE Sébastien]

they have the same community name but i will check my SNMP parameters ! Thank you very much !