ilo and pmp problems

[Safo]

Hi!

1.I have problem with integrated lights out. When i started sytem management homepage and I click on Integrateed Lights Out it show me another explorer window with text: FORBIDDEN you don`t have permision to access to this server

2. In CMS options>performance management pack options> when I click on configuration I saw error: The request url could not be retrieved the following error was encountered Acces diened

Please help me. Thanks

[Rob Buxton · Accepted solution]

What happens if you browse directly to the LO IP Address?
This should bring up a window to login onto the Lights Out, unless you don't have the LO configured and connected to the Network.

[Safo]

Hi Rob

When I browse directly to the LO IP Address problem was same. You have right Integrated lights out web interface not work....I`m downloaded lights out white paper and now I`m trying configure iLO.

[Rob Buxton]

ILO comes with a preconfigured administrator and password on a tag with the Server.

By default an ILO will use DHCP to get an address, obviously it needs to be plugged into a valid network that can server DHCP addresses.

You can see the address it's obtained from the System Home Page, Management Processor section, the integrated NIC should show the details.
You can then browse to this address, login using the credentials on the tag and then configure as appropriate.