MIB registered but traps not listed

[Jonathan Daniels]

Hi all,

We have a MIB for our software and have compiled it (using "mcompile my-mib.mib") and registered the resulting CFG file (using "mxmib -a my-mib.cfg"). This results in the mib being listed in both "mxmib -l" and the Web interface (Options -> Events -> SNMP Trap Settings) but none of the traps it contains are listed (again either inthe web interface or in "mxmib -t my-mib.mib"). It is a SNMP v2 compliant MIB but I was under the impression the "mcompile" converts to SNMP v1.

Anyone have any pointers - they would be much appreciated :)

Thanks,
Jon

[T. Vander Auwera]

There is a document in the HPSIM information library named "Compiling and customizing SNMP MIBs with HP Systems Insight Manager"
- www.hp.com/go/hpsim
- Information Library
- How to use section.


Did you already checked it?

[Kenneth Wernicke]

I have the same problem here, I added the mibs for the HP Procurve switches. I didn't receive any error on mcompile and mxmib, but when I look under SNMP Trap Settings and I select the MIB, the other information is not available (empty).

[DDR_1]

I have the same issue with Brocade mibs. Has anyone got to the bottom of this?

thanks

[alexbaier]

Hi,

I have the same problem. We have our own Private Enterprise Number from IANA. The mib-file that I've created can be compiled and registered with mcompile and mxmib without any errors. But none of the traps is listed in "SNMP Trap Settings".

Any help is very appreciated.

[Terry Taylor_4]

I have the same issue with a Blackberry Server MIB... anyone resolve this?

[kenny chia]

Hi
I have the same problem for HPSIM version 5 update 1 for Linux

I successfully registered the mib for the IP console viewer switch

[13:00:03 root@hpsim /opt/mx/mibs]# mxmib -a CPQKVM.cfg

IMPORTING CFG CPQKVM.cfg
COMMAND COMPLETED SUCCESSFULLY

But this entry does not show up in the web interface