Server Management - Systems Insight Manager
1837157 Members
2830 Online
110112 Solutions
New Discussion

PMP and memory and Exchange 2000 SP3 on a W2K adv SP4

 
Mikael_17
Advisor

PMP and memory and Exchange 2000 SP3 on a W2K adv SP4

I get this message on one machine:
""High average page read rate (below 5 is normal). However, there is still at least 20 MB of available memory. This can happen when a process is limited in the amount of memory it can allocate and results in high paging even though more memory is available. Thus this situation may look like a bottleneck when it is not""

I have totaly 4 GB in the machine and 1.8 GB free.

That shall I do?

Regards Mikael
2 REPLIES 2
Rogier Boeken
Frequent Advisor

Re: PMP and memory and Exchange 2000 SP3 on a W2K adv SP4

I have an exchange 2003 sp1 enterprise server runnning on w2k3 enterprise server and have the same issue from time to time

i believe it is a typical case of

Thus this situation may look like a bottleneck when it is not

best
rogier
Rob Buxton
Honored Contributor

Re: PMP and memory and Exchange 2000 SP3 on a W2K adv SP4

You can do nothing about it.
The application is not allocating sufficient memory, or it is releasing memory and then needs a chunk again.

The problem is there are times when Page Faulting is high due to the temporary demand.

That's why the detail of the message indicates it may not be a problem.