"No Management Processor" Reported.

[Stuart Garland]

Hi, I have just installed SIM v5 SP5, and all of the relevant agents etc. onto a DL380 G4.
When I logon to the system's Homepage, it reports that a Management Processor is installed. However, the CMS, after discovering the system, reports that there "is no management processor installed".
Am I missing something obvious here, or is this a know issue?
Any help greatly appreciated.
Thanks

[Daniel Leblanc · Accepted solution]

I have seen this in an upgrade ,
#1_try IDENTIFY
#2_try removing it and rediscover it(try with only one to begin with,if you have many).
#3_try DATA COOLECTION.

Me witht hise step it came back, and some i had to worked harder to bring it back and make sure its Management processor is discover?!!

[Aravindh Rajaram]

You have to discover (Automatic or Manual) the Management Processor in SIM.

[Daniel Leblanc]

AmicSys..Funny wasn't my last comment the same?

[Stuart Garland]

Thanks you guys ... problem solved !! Yipee!

[Stuart Garland]

Thanks again for your help.