SIM with Rack and Power Manger

[nathan_78]

I am not real clear on how to get RPM to work with SIM4.1.

any help??

[Nick Hromyak]

Under DISCOVERY FILTERS

Did you check the RPM to automatically discover?

Are you RPMs setup with an IP and SNMP with appropriate SNMP communities?

[nathan_78]

At this point they are just setup with the IP and the standard "public" SNMP string. I assume setting the SNMP string the same as our servers would help...

I will also look into the autodiscovery.

[Ivan KOVAC]

Hello

See the document HP Rack and Power manager User Guide at:
http://h200001.www2.hp.com/bc/docs/support/SupportManual/c00094670/c00094670.pdf

Appendix B,C

Ivan

[nathan_78]

Thanks Ivan!!