VCA HW not present in BL25p

[Kaneda_1]

Hi all.

One of the BL25P had a fibre card, it was removed after, but the VCA thinks it's still there....and that the driver is not updated. Obviously if one tries to update the driver it says that the HW is not present.

It says 1.5.1 current one needs to be updated to 1.5.2 (cp006501.exe)

This is the HW.
HP STORAGE WORK FIBER CHANNEL ADAPTER KIT FOR QLOGIC qllxxxx. scsi port driver 2000

We already reinstalled the VCA on the blade, the device is not showing in the device manager....

any ideas? thank you all....

[Rob Buxton]

That's because Windows still contains the drivers. And it's not easy to remove a driver for a device that's no longer there.

I've had the same issue before and never resolved it. The only thing I try and do now is remove the driver while the card is present and then remove the card itself.