10Gb 2-port SFP+ BCM57412 OCP3 Adapter

[lucii]

Greetings
I purchased 2 DL380 Gen10 plus with the 10Gb 2-port SFP+ BCM57412 OCP3 FC Adapter card pre-assembled, from iLo the card is in an Unknow state, from ESXI 8.02 it is not seen.
I updated the iLo to the latest version 3.0, I updated the network card driver to the latest version (227.1.111.0) but it still doesn't work.
Looking at the board behind the Server, it appears with all the LEDs off, the board has the SFP modules inserted and connected F.O. to the SAN.
I am experiencing the same anomaly on both servers.
In an ex PCI slot I have another card, the HPE SN1100Q 16Gb 2P FC HBA and this works correctly, on the iLo I see it enabled with a green check, and in ESXI it works correctly.

[support_s · Accepted solution]

System recommended content:

1. HPE ProLiant DL380 Gen10 Plus Server - Spare Parts

2. HPE ProLiant DL380 Gen10 Plus Server - Overview

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[TVVJ]

Hello,

Please reseat the cards and see if it makes a difference.

Regards,