Network Adapter driver and software for Proliant HP- DL360R03 X2.4/533 512 US

[uptown32]

Hi, I am trying to locate the driver / software for this model of Proliant server. I am not able to search for it. Some bazaar situation happened so I had to pull the hard drives out of a Proliant and put them in the HP- DL360R03 X2.4/533 512 spare I have. Now the Network connections showing up and under Device Manager, I have tried to add the adapter but no luck. It is an old Windows 2003 and we need to get it working before thinking of upgrading it. I need to reinstall the drivers for the network adapter. Can someone please help?

[TVVJ]

Hello,

You may download the network drivers from the HPE ProLiant DL360 G3 Server's driver download page.

Regards,

[uptown32]

@TVVJ Thank you for the link to download the software and drivers. I thought this was going to be an EASY fix but now all the drivers I have used does not see the network adapter. Under Device Manager, the network adapter is hidden. When I unhide them, it is showing:

HP NC7780 Gigabit Server Adapter - Trend Micro Common Firewall
HP NC7781 Gigabit Server Adapter - Trend Micro common Firewall.

Note: I pulled the harddrive with the server out from an old Proliant because there was issue with the system. It is not booted in another Proliant DL360. You would think it is the same hardware but it is not. When I try to uninstall the network card, I get an error that it is not possible. There are a list of HP Array etc in the Add/Remove Program applet. Any suggestion would be appreciated.

[TVVJ]

Hello,

Not sure about "Trend Micro Common Firewall". If it were a firewall program, how about temporarily suspend or allow the adapters in that application and see if they work.

Regards,

[uptown32]

@TVVJ I was trying to suspend or shut down TM without a password, it did not work. I tried every password I know I have configured the server with but none of them work. So I ended up uninstaller TM via CMD prompt because it does not require a password. After restarting the server, I got a BSOD and the server kept repeating the power-up and restarting. there is an error code (0x0000007B (0XF789AA94, 0XC0000034, 0x00000000, .....)

Any suggestion on how to get this up and running? What is the key to getting into BIOS and also booting from CD for HP Proliant?

Thanks