DL380 G8 ILO Status degraded / Nand failure --> Raid congig and windows install

[Early]

Hi there , 

I have a DL380 G8 with defekt NAND, Already try everything from HP Service (Reset/Firmware update etc) but It seems to be a known problem fronm the Board ! The question is, if I can use the server , config the Raid and install Windows server through this Problem and without Intelligent Provisionning ? How is the best way then to configure the Server ! 

Thanks 

[support_s]

System recommended content:

1. Advisory: (Revision) HPE Integrated Lights-Out 4 (iLO 4) – How to Format the NAND Used to Store AHS logs, OneView Profiles, and Intelligent Provisioning

2. Advisory: (Revision) HPE Integrated Lights-Out 4 (iLO 4) - HPE Active Health System (AHS) Logs and HPE OneView Profiles May Be Unavailable Causing iLO Self-Test Error 8192, Embedded Media Manager and Other Errors

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[MV3]

Hello,

Unfortunately you will not be able to install the OS while iLO is in degraded state (NAND Issue).

We would suggest you to follow the below advisory to format NAND and fix the issue first.

Advisory : https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00048622en_us

Cheers...