DL380 Gen10 CTO Build - TPM 2.0 Module

[ScottClark]

Hi,

I am currently building a DL380 Gen10 in OCA but have found that the option to select the TPM 2.0 Module is missing.  Does anyone know if this is an issue with OCA or is it now included with the base server??

Thanks

Scott

[SanjeevGoyal]

Hello,

Please try to follow the below customer advisory.

Advisory: HPE ProLiant Servers - ProLiant Updates Catalog Firmware Components May Fail to Deploy on Servers Where TPM is Installed

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00067755en_us

Please share the complete error message, if the issue still persists.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

[ScottClark]

Thank you for your response but the link you provided only relates to a failure with comonents once the TPM is installed.  My question related to creating a configuration at build stage using OCA which is pre-sale of the device..  The TPM 2.0 is no longer listed as an added option within OCA so I was asking if this is removed or is it is now part of the DL380 base unit??

868703-B21 HPE ProLiant DL380 Gen10 8SFF Configure-to-order Server

[SanjeevGoyal]

Hello,

I hope the below information will help you.

HPE ProLiant DL380 Gen10 Server Quick space

HPE Trusted Platform Module 2.0 Gen10 Option 864279-B21
Notes:
­ HPE Trusted Platform Module 2.0 option works with Gen10 servers with UEFI Mode not Legacy Mode. It is
not compatible with HPE ProLiant Gen8 servers or earlier generation variants.
­ HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with
any other TPM module.

HPE Gen10 TPM 1.2 FIO Setting 
Notes: This is a FIO setting to allow the TPM 2.0 module to operate in a TPM 1.2 mode

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,