ML 110 G10 - NVME?

[GaryHe]

Hello

I just got a new ML110 Gen10 and my resller told me that NVMe was not availalbe for the ML110 but when I look at the quick specs (yes I know I hsould have asked this before I bought it :p)  it talks about  and NVME option.

Can NVMe be added to the ML110 gen 10 and if so, what do I need to do to make that happen?

THanks !

Garyhe

[SanjeevGoyal]

Hello,

I hope the below link will help you.

HPE ProLiant ML110 Gen10 Server - Option Parts

https://support.hpe.com/hpesc/public/docDisplay?docId=a00028326en_us&docLocale=en_US

NOTE:

1. • M.2 drives go in the primary riser and use S100i SATA controller only.
   • M.2 supports software RAID only.
2. • An NVME (826689-B21 or 873781-B21) or premium (826690-B21) drive cage is required to support these drives in conjunction with a NVMe riser kit.
   • HPE has qualified the NVMe drive portfolio using the Operating System (OS) inbox drivers, check the below link for QuickSpecs in HPE SSD:

     Click here to access the QuickSpecs page for HPE SSD .

     If you feel this was helpful please click the KUDOS! thumb below!   

     Regards,

[BPSingh]

Greetings!

https://h20195.www2.hpe.com/v2/gethtml.aspx?docname=a00021851enw 

The quickspecs talks about HPE NS204i-p Gen10 Plus x2 Lanes NVMe PCIe3 x8 Boot Device P12965-B21 which is an optional part.

Did you get a chance to check with the reseller or the HPE sales about this?

Image: https://partsurfer.hpe.com/ShowPhoto.aspx?partnumber=P24886-001

The system board should have required slot to install this if option is supported.