DL380 Gen10 ESXI 7.0 u3 Raid monitor

[Abanoub_Ramzy]

i have an HPE DL380 Gen 10 server with ESXI 7.0 update 3 and i configured the SNMP in the ESXI and i want to read the hardware sensors which monitor to the the ESXI system monitor page but i can not map them to the SNMP or what MIB should i use because i want to monitor the raid and degree and i can not find a possible solution except mapping the variables is it applicable and how can i make it in the ESXI? i have P408i-1 SR Gen10 adapter

[support_s]

System recommended content:

1. HPE ProLiant DL380 Gen10 Server - LED Indicators

2. HPE ProLiant DL380 Gen10 Server - Option Parts

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[TVVJ]

Hello,

You may refer to section "Using iLO with HPE SIM" in the HPE iLO 5 User Guide. Also, refer to topics under section "Configuring iLO management settings" for more clarity on server management using iLO 5.

Regards,

[Abanoub_Ramzy]

The thing is i can't connect to the ILO so i have to get all the possible data from ESXI not the ILO

[Abanoub_Ramzy · Accepted solution]

Update: i contacted HPE support and they made it clear that i can not see the raided disk through the ESXI.

[Sunitha_Mod]

Hello @Abanoub_Ramzy,

We are glad to know your concern has been addressed.