Servers - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant DL380p Gen8

 
SOLVED
Go to solution
Highlighted
New Member

HP ProLiant DL380p Gen8

Hi All,

For the past few days, one of my servers rebooted and is now stuck on Power and Thermal Calibration Complete Screen,

I am completely out of ideas.

Any help would be appreciated.

Thank you

Wayne

6 REPLIES 6
Highlighted
HPE Pro

Re: HP ProLiant DL380p Gen8

Hi,

Few suggestions:

1. Update all the firmware and drivers to latest. (Makesure BIOS and ILO updated to latest)

2. Unplug any USB devices/Disconnnect any KVM connected to it and check.

3. Check IML for any errors (Kindly Post here if does not work)

Hope this helps!

regards,

Sudhir

I work for HPE
Accept or Kudo

Highlighted
New Member

Re: HP ProLiant DL380p Gen8

Thank you for coming back to me, but i have been able to get past that issue now. 

Thie issue i am having now is that the server is not loaded my ESXi,

No activity on the drives at all.

I have pressed F8 during bootup to look at the smart array and i am getting the following error

Slot 0 HP Smart Array P420i Controller

Module Critical Error

Action: Replace Cache Module

Controller is disabled until this problem is resolved.

 

Highlighted
New Member
Solution

Re: HP ProLiant DL380p Gen8

Just reseating the Cache Memory, trying to boot up now.

Highlighted
New Member

Re: HP ProLiant DL380p Gen8

I now have hard disk activity.

Highlighted
New Member

Re: HP ProLiant DL380p Gen8

All working

Highlighted
HPE Pro

Re: HP ProLiant DL380p Gen8

Glad to hear that.

Verify Cache and Battery Status under ILO, 

Hope all healthy.

 

Regards,

Sudhir

I work for HPE
Accept or Kudo