HP R5000 UPS // Shutdown Parameters

[amireg]

could you please have a look on the attached image which contains the (Shutdown Parameters) I have in my HP R5000 UPS , as the UPS only last for five minutes , I need to make sure that these parameters are ok and will work well in my UPS As I have already install new 36 batteries in it .

Are the parameters are right ???

Thanks in advance .
Amir Gamal
IT Manager

[support_s]

System recommended content:

1. HP UPS R5000 Installation Instructions

2. HPE UPS R5000 User Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[amireg]

I couldn't understand this manual , I just need to know exacly are these paramerts right and will allow the ups to carry on the servers for 30 minutes at least or not ? 

[Bunsol]

Parameters look fine. Point to remember is that under shutdown parameters the options are first parameter or the second, which ever comes first.
Test this and if there is issues then log a support ticket.

[amireg]

I already tested it , but also It was 5 minutes but unforuntely the UPS shutdown after 5 minutes also , I don't know why !!!

[Bunsol]

Please get a support ticket logged as this might require further diagnosis.