I can't activate the cache of my P822 controller

[TheOakley]

I can't activate the cache of my P822 controller (attached image in link bellow).

I have the battery module working, but the SSA does not have the options to configure the cache (attached image in link bellow).

Please, can anyone help me.

https://freeimage.host/i/V2L76v 

https://freeimage.host/i/V2L5MJ

[TVVJ]

Hello,

It may be required that the Array Diagnostics Utility (ADU) logs needs to be reviewed to isolate the issue. Please contact HPE Support at the HPE Support Center web portal.

Regards,

[BPSingh]

Greetings!

Under Smart Storage Controller there is an alert seen on the P222 controller. Please share screenshot of the alert.

[TheOakley]

Follow the alert screen.

I will be using my controller with an HP StorageWorks Ultrium 3000 SAS tape drive.

That's why I need to enable the controller cache

https://freeimage.host/i/VYCt1e

[BPSingh]

Greetings!

There are no physical drives installed in the server, so no logical drives hence no option to configure cache. 

If you want to test the cache, please install drives, configure logical drive to test. 

[TheOakley]

Yes I understand, but I will not use the controller with a physical drive. I will be using it with an HP StorageWorks Ultrium 3000 SAS tape drive . 

In the previous error message, it says that if I am going to use as a host controller for tape devices only, I should ignore the warning.

[TheOakley]

I need the cache because I'm going to use an LTFS mapping, and HPE LTFS can't map the tape as the HBA driver doesn't support "Required transfer size (512kb)" (image bellow)

https://freeimage.host/i/VYDk5g

[BPSingh]

Greetings!

I wanted to check the alerts because I thought there may be cache related alerts. But after seeing the screenshots, I understand that there is no physical drive connected and you just want to connect standalone HP StorageWorks Ultrium 3000 SAS tape drive.

Could you please ensure if the controller is running latest driver and firmware as per the OS installed? 

Please refer the below compatibility matrix

https://www.hpe.com/storage/StoreEverSupportMatrix 

[TheOakley]

follow the controller driver and firmware images. My operating system is Windows Server 2016

https://freeimage.host/i/VXltXs

https://freeimage.host/i/VX0dk7

[TheOakley]

Someone please help me.

[TheOakley]

I solved. Thanks