Query: ILO SNMP Value Overall Status

[rvd92]

Hello,

Can anybody help me? we would like monitor our HPE servers with snmp to Zabbix.

But i have a problem with ILO4. in the webinterface it is all green, no fault.

but response from snmp is:

[ ~]# snmpwalk -v2c -c x.x.x.x x.x.x.x 1.3.6.1.4.1.232.6.1.3
SNMPv2-SMI::enterprises.232.6.1.3.0 = INTEGER: 4

I have triyd to reset ILO en clear the IML log.

Where can i find why is given 4 (Failure) ?

[support_s]

System recommended content:

1. Notice: HPE Apollo 4200 Gen10 Plus - Information on HPE Integrated Lights-Out (iLO) Integrated Management Log (IML) and SNMP Fan Status Support for Single Rotor Fan Failure

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

[rvd92]

Sorry this is not helping for mee, i don't have a Apollo 4200 but a DL360Gen 9 and 10. Also i don't have a failure for FAN.

[rvd92 · Accepted solution]

Oke i don't know why..  but after clear IML logs and resetting ILO it is works normally now.