Smart Array

[AndresTA]

I have a DL180 Gen10 server, smart array activated. Connected 3 disks of 2 TB and one of 4 TB. Create a raid 5 with the 3 of 2 TB and a raid 0 with the one of 4.
I had the operating system installed and after a firmware update the server stopped seeing the disks.
Could you tell me how to proceed?
Thank you.

[DeepakJajware]

Hello Andres 

Thank you for contacting HPE Community support . 

The issue as you described seems to be occured after a FW update . 

It might have affected the SA controller on the board.

Hence I would recommend you to Open a Case with HPE Support Team and get them invetiagte the logs in more detailed way . 

If needed and unit under warranty or contract they will prefer to replace the HW spare gone bad. 

Thank you