I can't configurate OpenFlow on HP MSR3012

[juankamiloc93]

Hello,

I Have HP MSR3012 Router JG409A and I want work with SDN, but a try configurate open flow on divice, the CLI doesn't recognize command.

I saw the configuration guide and it say that router model is compatible with SDN/Openflow

follow is vesrsion information

HP Comware Software, Version 7.1.042, Release 0007P16
Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
HP MSR3012 uptime is 0 weeks, 0 days, 1 hour, 23 minutes
Last reboot reason : User reboot
Boot image: cfa0:/msr3000-cmw710-boot-r0007p16.bin
Boot image version: 7.1.042P11, Release 0007P16
  Compiled Mar 18 2014 15:31:05
System image: cfa0:/msr3000-cmw710-system-r0007p16.bin
System image version: 7.1.042, Release 0007P16
  Compiled Mar 18 2014 15:31:38
Feature image(s) list:
  cfa0:/msr3000-cmw710-voice-r0007p16.bin, version: 7.1.042
    Compiled Mar 18 2014 15:32:33
  cfa0:/msr3000-cmw710-data-r0007p16.bin, version: 7.1.042
    Compiled Mar 18 2014 15:32:36

CPU ID: 0x2
1G bytes DDR3 SDRAM Memory
8M bytes Flash Memory
PCB               Version:  2.0
CPLD              Version:  2.0
Basic    BootWare Version:  1.41
Extended BootWare Version:  1.41
[SLOT  0]AUX                       (Hardware)2.0,   (Driver)1.0,   (CPLD)2.0
[SLOT  0]GE0/0                     (Hardware)2.0,   (Driver)1.0,   (CPLD)2.0
[SLOT  0]GE0/1                     (Hardware)2.0,   (Driver)1.0,   (CPLD)2.0
[SLOT  0]GE0/2                     (Hardware)2.0,   (Driver)1.0,   (CPLD)2.0
[SLOT  0]CELLULAR0/0               (Hardware)2.0,   (Driver)1.0,   (CPLD)2.0
[SLOT  0]CELLULAR0/1               (Hardware)2.0,   (Driver)1.0,   (CPLD)2.0

Thanks!

[ShaunWackerly]

It does seem to imply that OpenFlow is supported on MSR3000, based on the quick spec sheet mentioning the feature on page 4:

Quick Specs: https://h20195.www2.hpe.com/v2/getpdf.aspx/c04123140.pdf?ver=15

I wonder if this thread might help, since it gives a sample openflow configuration on Comware 7:

https://support.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0127771&docLocale=en_US

Note that If you are using the VAN controller, it has not been tested to support the MSR3000 series. The support matrix lists the switches and firmware versions that VAN supports:

https://support.hpe.com/hpsc/doc/public/display?docId=c05040231