HPE IMC 7.3 and Linux SNMP V3 parameter error.

[DoJu]

Hi All,

On the LINUX VM, we've created the SNMPv3 user:

rouser snmp
createUser snmp SHA "password" AES "password"
rocommunity public
trap2sink IP_IMC public

Added IP to IMC, and SNMPv3 Priv-AES128 Auth-SHA

Yet when testing SNMPv3 in IMC, it returns SNMP v3 parameter error.

Any ideas would be appreciated!

[sbhat09]

Hello @DoJu,

Please check if you find this discussion chain useful - https://community.hpe.com/t5/IMC/IMC-cant-communicate-with-SNMP-Device/td-p/6976530#.YtkYjXZByUk

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

[DoJu]

@sbhat09 

Thanks for the reply.

Definately the LINUX host.

Paessler SNMP Tester - 20.2.4 Computername: VLAN Interface: <IMC_host_IP>

22/07/2022 2:43:50 AM (3 ms) : Device: <LINUX_VM_IP>

22/07/2022 2:43:50 AM (5 ms) : SNMP v3

22/07/2022 2:43:50 AM (8 ms) : Uptime

22/07/2022 2:43:50 AM (88 ms) : SNMP Datatype: ASN_UNIVERSAL

22/07/2022 2:43:50 AM (92 ms) : -------

22/07/2022 2:43:50 AM (95 ms) : DISMAN-EVENT-MIB::sysUpTimeInstance = Authentication failure (incorrect password, community or key) -35 ( 0 seconds )

22/07/2022 2:43:50 AM (185 ms) : SNMP Datatype: ASN_UNIVERSAL

22/07/2022 2:43:50 AM (188 ms) : HOST-RESOURCES-MIB::hrSystemUptime.0 = Authentication failure (incorrect password, community or key) -35 ( 0 seconds )

22/07/2022 2:43:50 AM (191 ms) : Done

[sbhat09]

Hello @DoJu,

This time, it is authentication error. No more 'SNMP V3 parameter error'.

Were you able to overcome the original error?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.