H/W障害を、SNMPで検知したいが、どのOIDを監視したらよいか分からない。（HPE StoreEasy 1660 Storage）

[tonkotsu_taku]

SNMPマネージャソフト(JP1)で
H/W障害(CPU、メモリ、内蔵DISK、ファン等)を検知したいが、
どのOID(MIBファイル)を監視したら良いか分かりません。
サーバ:HPE StoreEasy 1660 Storage

実際に検知してるものがこちら

cpqNic3RedundancyIncreased (.1.3.6.1.4.1.232.0.18013)

cpqHoMibHealthStatusArrayChangeTrap (.1.3.6.1.4.1.232.0.11020)

cpqNic3ConnectivityRestored (.1.3.6.1.4.1.232.0.18011)

cpqNic3RedundancyReduced (.1.3.6.1.4.1.232.0.18014)

cpqNic3RedundancyIncreased (.1.3.6.1.4.1.232.0.18013)

cpqHoMibHealthStatusArrayChangeTrap (.1.3.6.1.4.1.232.0.11020)

cpqHoMibHealthStatusArrayChangeTrap (.1.3.6.1.4.1.232.0.11020)

cpqHe4FltTolPowerSupplyACpowerloss (.1.3.6.1.4.1.232.0.6069)

cpqHe3FltTolPowerRedundancyLost (.1.3.6.1.4.1.232.0.6032)

cpqHoMibHealthStatusArrayChangeTrap (.1.3.6.1.4.1.232.0.11020)

cpqHe4FltTolPowerSupplyOk (.1.3.6.1.4.1.232.0.6048)

cpqHe3FltTolPowerRedundancyRestored (.1.3.6.1.4.1.232.0.6054)

cpqHoMibHealthStatusArrayChangeTrap (.1.3.6.1.4.1.232.0.11020)

cpqHo2GenericTrap(.1.3.6.1.4.1.232.0.11003)

1.3.6.14.232まではHPでの固定IDだと思うのですが、それ以降の「０」も固定のIDでしょうか？
それとも１～６まであるのでしょうか
どなたか詳しい方、ご教示ください。

Google Translated: 

I want to detect H/W failures using SNMP, but I don't know which OID to monitor. (HPE StoreEasy 1660 Storage)
With SNMP manager software (JP1)
I want to detect H/W failures (CPU, memory, built-in disk, fan, etc.).
I don't know which OID (MIB file) to monitor.
Server: HPE StoreEasy 1660 Storage

Here's what we're actually detecting

cpqNic3RedundancyIncreased (.1.3.6.1.4.1.232.0.18013)

cpqHoMibHealthStatusArrayChangeTrap (.1.3.6.1.4.1.232.0.11020)

cpqNic3ConnectivityRestored (.1.3.6.1.4.1.232.0.18011)

cpqNic3RedundancyReduced (.1.3.6.1.4.1.232.0.18014)

cpqNic3RedundancyIncreased (.1.3.6.1.4.1.232.0.18013)

cpqHoMibHealthStatusArrayChangeTrap (.1.3.6.1.4.1.232.0.11020)

cpqHoMibHealthStatusArrayChangeTrap (.1.3.6.1.4.1.232.0.11020)

cpqHe4FltTolPowerSupplyACpowerloss (.1.3.6.1.4.1.232.0.6069)

cpqHe3FltTolPowerRedundancyLost (.1.3.6.1.4.1.232.0.6032)

cpqHoMibHealthStatusArrayChangeTrap (.1.3.6.1.4.1.232.0.11020)

cpqHe4FltTolPowerSupplyOk (.1.3.6.1.4.1.232.0.6048)

cpqHe3FltTolPowerRedundancyRestored (.1.3.6.1.4.1.232.0.6054)

cpqHoMibHealthStatusArrayChangeTrap (.1.3.6.1.4.1.232.0.11020)

cpqHo2GenericTrap(.1.3.6.1.4.1.232.0.11003)

I think up to 1.3.6.14.232 is a fixed ID on HP, but is "0" after that also a fixed ID?
Or is it from 1 to 6?
If anyone knows more, please let me know.

[neutral]

Hello @tonkotsu_taku,

These logs seem to be relevant to firmware issues. Did you try downloading the AHS report from the StoreEasy Management Console to find the actual issue?

Thanks & Regards,

Ashik N S