Driver for HP Ultrium 7-SCSI SCSI Sequential Device

[JulDafa]

Hello my friends

Im new in storage management and I need HELP solving this problem.

I have conected A tape library HPE StoreEver MSL4048 with HP H241 Smart HBA

And i have this driver in Device Management missing.

Driver for HP Ultrium 7-SCSI SCSI Sequential Device

Can anybody direct me to do this connection right.

[Curtis_Ballard]

You should be able to find the driver bundle here:

http://h20566.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=1008615524&swLangOid=8&swEnvOid=54

It seems like it moves around.  I had to go to the products page, slect the tape drive, then select 'support and maintenance' to get to the right page.

There is also a driver for the tape library but most applications don't require the library driver to be installed so you might not need it.

[JulDafa]

Thank u for your answer.

But my issue is that I have a gen 8 DL320 server and in my research i have found that this server is not compatible with H241 Smart HBA, and for gen8 HP recomends H222.  Smart HBA

The HPE StoreEver MSL4048 with LTO7 tapes is not supported with Gen 8 Servers and H222 Smart HBA

Is  it true, do you have any experience for this connection .

Thank u in advance.

[Curtis_Ballard]

While it isn't a "supported" configuration I have used an H241 extensively with a DL380 Gen 8 server.  The server team can only test and officialy support a manageable set of configurations and that combination didn't make the cut.  That card will probably work with the DL320 as well but won't be officially supported so you might run into problems if you have to call for server support.

[JulDafa]

Thank u for your information.