HPE Community
StoreEver Tape Storage
1822483 Members
2457 Online
109642 Solutions
New Discussion юеВ

Ignite HP DAT 72

 
Darren Etheridge_2
Super Advisor

тАО06-28-2010 09:20 AM

тАО06-28-2010 09:20 AM

Ignite HP DAT 72

I have a HP DAT 72 Drive in a HP 5300 Tape Library unit. I have performed an IGNITE on one of our RP7420s, but when I rebooted the system and performed a SEA, the system did not see the DAT 72 as a bootable device.

I pulled the DAT 72 Drive out & put in a HP DDS4 Drive and it sees it as a boot device.

What am I missing on the DAT 72? Are there any jumper settings I need to set for it to be seen as a bootable device on the RP7420?

Thanks!
0 Kudos
2 REPLIES 2
Dennis Handly
Acclaimed Contributor

тАО07-04-2010 01:12 AM

тАО07-04-2010 01:12 AM

Re: Ignite HP DAT 72

Your previous thread:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1436418
0 Kudos
Darren Etheridge_2
Super Advisor

тАО07-06-2010 05:18 AM

тАО07-06-2010 05:18 AM

Re: Ignite HP DAT 72

Replaced DDS
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.