StoreEver Tape Storage
1748255 Members
3910 Online
108760 Solutions
New Discussion юеВ

Re: Library media removal prevented by host - Code: 46

 
Nadica Delova
Occasional Contributor

Library media removal prevented by host - Code: 46

Hi there,

We have recently purchased MSL2024 library and are using 2 x LTO-4 Ultrium 1760 drives.

When using RMI to release magazines we get error

Master Library:
ilegal request, library media removal prevented by host-Code:46

Using the OCP also results in error and can't unlock the magazines.

Rebooting the library temporary resolves the issue and is OK for couple of next releases but then the problem comes back again.

Please advice.
Many thanks
N
3 REPLIES 3
Rajat Bhargava
HPE Pro

Re: Library media removal prevented by host - Code: 46

Nadica,
Please uncheck media removal prevention in your backup application. This should resolve the issue for you.

Regards
Rajat
Regards
Rajat_B
I am an HPE Employee
GustavoT
Valued Contributor

Re: Library media removal prevented by host - Code: 46

Hi,

Hope is not too late, the Prevent Media Removal command is usually set by the backup application when running a backup job and it is automatically released when the job is done. If you're trying to open a magazine while a backup is running that may be your problem. I don't think there's an option in the ISV to set this up but you may want to check with them. Rebooting the library or stoping the ISV's services will clear the command.

From the tape drive perspective, you can use L&TT to turn off the PMR feature by going into the Utility menu option.

Regards,
Nadica Delova
Occasional Contributor

Re: Library media removal prevented by host - Code: 46

Dear All,

Thank you very much for your replies.

Just to clarify, there were definitely no active jobs running when trying to release the magazines.

The solution was:
Prior to removing the magazines run a unlock job from backup exec

This would be by going to the devices tab and right clicking the MSL 2024 and clicking Unlock.

Thanks again for your help on this.