LTO-5 Ultrium 3000 Firmware update

[jstenner]

I purchased an Ultrium 3000 drive in 2013. It has worked flawlessly for regular LTO-5 archiving since then. I decided I'd like to format a set of tapes for LTFS and using HPE StoreOpen 3.4.2, Canister, mkltfs it fails here:

Resetting the medium's capacity proportion
LTFS20064E Locate failed (-1)

I think it might be because the current firmware (Z5AD) needs to be updated to support multi-partitioning. (just guessing) I have searched the HPE website find that there's a Z6ED firmware update but can't download it because it's locked behind a paywall. I called support and they ask for my device serial number. I give it to them and they say it's not found.

Is there any way I can update my firmware? TIA for any help.

[jstenner]

My OS is Mac OSX 10.15.7

[support_s]

System recommended content:

1. CUSTOMER NOTICE: HP StoreEver LTO-5 Ultrium 3000 SAS tape drive Z64D firmware is available

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

[jstenner]

Yes, I found that page previously. The download button is locked. When you click on it, a window pops up saying "Support validation required" - "An active warranty or support agreement covering StoreEver must be linked to your HPE Support Center profile to access this firmware."

This was purchased in 2013...well out of warranty and I don't have a support contract. Is there a way to get firmware updates, otherwise?

Thanks

[KKrew]

I have warranty for my device and still can't get past the paywall.

[NarayanKK-SO]

Hello @jstenner,

Kindly install HPE Library and Tape tools to perform the FW upgrade.

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_daaf30b92f6746c48bb149d764#tab2

If you are using any backup app. Make sure to stop the service or the app before running a device scan in LTT.

Let us know if this helped. 

Thanks,

[jstenner]

Thank you, but I had already installed the latest version of L&TT.

1. I don't have any backup software running.

2. When I do a device scan I get this:

3. I would still need the firmware which is located behind a paywall in order to update the device.

Perhaps you can tell me whether my device, which has firmware version Z5AD *should* support LTFS?

Thanks,

Jack

Moderator edit: Erased the confidential info.

[NarayanKK-SO]

Hello Frank,

Please let us know whether this drive is a Standalone External/Internal or Rack-mounted or a part of a Library ?

Provide us with the Part# details as well, without which we cannot provide you the latest FW. 

To answer your query, HPE StoreEver LTO 5 drive supports LTFS and that is not dependent on the FW. You can also check the Compatibility matrix for all StoreEver Products from the following file. You will need HPE Passport to login.

https://h20272.www2.hpe.com/spock/utility/document.aspx?docurl=Shared%20Documents/hw/nearline/2022_DAPRMatrix.zip

Hope this answers your query. 

Thanks

[jstenner]

This is a standalone external unit.

Part number: 693417-001

Thanks,

Jack

[NarayanKK-SO]

@jstenner 

Please provide your email ID through a private message. So i can send you the .frm file. You need to use L&TT to perform the upgrade. 

File Name:- LTT_Ultrium_5-SCSI_Z6ED_STANDALONE.frm

Thanks 

[jstenner]

Thank you! Thank you!

personal info erased

[NarayanKK-SO · Accepted solution]

Hello Jack,

I have sent an email with the FRM file. Hope this helps. 

Thanks.

[jstenner]

Following up: I was able to install the firmware via Windows (BootCamp on Mac laptop). After that, I was able to access the drive and format a tape with LTFS on my Mac. All good now.

Thank you!

[Icebear]

Hi NarayanKK-SO, can you please send me LTT_Ultrium_5-SCSI_Z6ED_STANDALONE.frm by e-mail. 
I'm afraid i interrupted the update, but cant start the firmware update again, I only have an file ending with ".E"
Best regards

[vinayhod2013]

Please provide me firmware for my tape drive hp ultrium 3000 sas firmeare ver .z6ed

My email address is personal info erased

Thanking you

[Sunitha_Mod]

Hello @vinayhod2013,

Thank you for posting! Since you have posted in an old topic and there is no response yet, I would recommend you to create a new topic using the create "New Discussion" button.

[Sarge198]

@NarayanKK-SO 

Hi NarayanKK-SO, can you please send me LTT_Ultrium_5-SCSI_Z6ED_STANDALONE.frm by e-mail. 

Thanks,

[dulasau]

Could you please send it to me as well!!! Thank you!

[brl]

Please send me the file as well.

[b1tfan]

I would also appreciate getting the LTT_Ultrium_5-SCSI_Z6ED_STANDALONE.frm by mail.

Thanks