Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
In DP-XBackup if a version of the file is not specified, the latest version of the selected object will be restored by default. A Version of a file is a
backup from a particular date on a particular media.
WARNING:
Do NOT put the tape in the drive with out first write protecting it before attempting any data restoration!
If DP-X Backup is trying to run a backup job, and is hung, it may start writing to the tape you want to restore from. There is a write protect tab somewhere on the tape, consult the tape manufacturer's documentation for media specific instructions. During the restore job, DP-X Backup does not write to the tape, so write protecting it will not have any negative consequences.
Action Plan 1:
TO RESTORE A VERSION OF A FILE:
1. Open DP-X Backup (Start > All Programs > DP-X> DP-X Backup)
2. Create a New Restore Job:
A. Navigate to the Wizards desk bar (in the left column).
B. Double click the Restore item in the right pane.
C. Double click Restore Specific in the right pane.
D. Type a name in the appropriate space then click OK.
This will open the properties of the newly created job.
E. In the "Pages" desk bar (in the right column) click "Selection".
1) Expand the Network item in the Right pane (click the "+" to the left
of the Network item).
2) Locate the object you want to restore within the file system.
3) Highlight the item you want to restore.
4) locate the toolbar above the middle of the properties page
(located at top), click the "Versions" button.
5) In the subsequent window that opens you will see dates -select the
(date) Version you want to restore by highlighting same and clicking
OK.
F. Selecting "Device/Media".
1) Select the device you want to use for the restore:
a. Highlight what is in the "Devices to be used" box and click the
"Delete" button at the bottom of this box.
2) Select the "Add" button at the bottom of this box once the field is
clear.
3) Double click the Network object in the resulting window.
4) Double click the Devices object.
5) Highlight the device you want to use for the restore, and click the
"Next" button at the bottom of this window.
G. Selecting â Job Options".
1) Click the "Advanced Options" button.
2) Uncheck the following boxes:
a. Mount points
b. Child security
c. Parent security
d. Volume restrictions
3) Select "Next" at the bottom of this window.
H. Change the Schedule type to "Run now" in the drop down list.
I. Select the "Apply" button at the bottom of this window.
J. Select the "OK" button at the bottom of this window to close the
properties of the job.
If prompted, simply click "Yes" and allow the job to run.
Action Plan 2: If you are getting the same error after specifying the correct device for restore, perform import as mentioned below and start restore job again.
To import media
1. Select Wizards from the Favorites desk bar.
2. Display the Media wizards in the list of available media wizards.
3. Select the Import Media wizard.
4. Follow the instructions to select the media to be imported and to schedule the job.
5. If you schedule the job to run now, it will start as soon as you click Finish on the last screen of the wizard.
I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
backup from a particular date on a particular media.
WARNING:
Do NOT put the tape in the drive with out first write protecting it before attempting any data restoration!
If DP-X Backup is trying to run a backup job, and is hung, it may start writing to the tape you want to restore from. There is a write protect tab somewhere on the tape, consult the tape manufacturer's documentation for media specific instructions. During the restore job, DP-X Backup does not write to the tape, so write protecting it will not have any negative consequences.
Action Plan 1:
TO RESTORE A VERSION OF A FILE:
1. Open DP-X Backup (Start > All Programs > DP-X> DP-X Backup)
2. Create a New Restore Job:
A. Navigate to the Wizards desk bar (in the left column).
B. Double click the Restore item in the right pane.
C. Double click Restore Specific in the right pane.
D. Type a name in the appropriate space then click OK.
This will open the properties of the newly created job.
E. In the "Pages" desk bar (in the right column) click "Selection".
1) Expand the Network item in the Right pane (click the "+" to the left
of the Network item).
2) Locate the object you want to restore within the file system.
3) Highlight the item you want to restore.
4) locate the toolbar above the middle of the properties page
(located at top), click the "Versions" button.
5) In the subsequent window that opens you will see dates -select the
(date) Version you want to restore by highlighting same and clicking
OK.
F. Selecting "Device/Media".
1) Select the device you want to use for the restore:
a. Highlight what is in the "Devices to be used" box and click the
"Delete" button at the bottom of this box.
2) Select the "Add" button at the bottom of this box once the field is
clear.
3) Double click the Network object in the resulting window.
4) Double click the Devices object.
5) Highlight the device you want to use for the restore, and click the
"Next" button at the bottom of this window.
G. Selecting â Job Options".
1) Click the "Advanced Options" button.
2) Uncheck the following boxes:
a. Mount points
b. Child security
c. Parent security
d. Volume restrictions
3) Select "Next" at the bottom of this window.
H. Change the Schedule type to "Run now" in the drop down list.
I. Select the "Apply" button at the bottom of this window.
J. Select the "OK" button at the bottom of this window to close the
properties of the job.
If prompted, simply click "Yes" and allow the job to run.
Action Plan 2: If you are getting the same error after specifying the correct device for restore, perform import as mentioned below and start restore job again.
To import media
1. Select Wizards from the Favorites desk bar.
2. Display the Media wizards in the list of available media wizards.
3. Select the Import Media wizard.
4. Follow the instructions to select the media to be imported and to schedule the job.
5. If you schedule the job to run now, it will start as soon as you click Finish on the last screen of the wizard.
I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
If you are satisfied with the replies then don't forget to assign points.
I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
