1748007 Members
4397 Online
108757 Solutions
New Discussion

VLS9000 design

 
SamirShrestha
Frequent Advisor

VLS9000 design

I've VLS9000 with two 10TB capacity module full of 1TBx24 drives.Can some one suggest or advise to design How many slot/ How many drive/other need to configure in VLS.What are recomendation design drive configuration for VLS?

 

 

P.S. This thread has been moved from Tape Libraries and Drives to Disk-Based Backup. - Hp Forum Moderator

2 REPLIES 2
Víctor Cespón
Honored Contributor

Re: VLS9000 design

The only thing you can configure are the storage pools. Each 10 TB capacity module is automatically configured, you cannot change that. You can choose to have both capacity modules on the same storage pool or not.

See "Configuring the storage pool policy" on the user guide.
Marino Meloni_1
Honored Contributor

Re: VLS9000 design

you can found here lot of answers related to the VLS configuration and best practice:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02514757/c02514757.pdf