Avaya 46XX on HP Procurve 2650 Switches

[Marc Pedro]

Does anybody have a running config of a configuration with PCs plugged
into 46XX then to a 2650 on different vlans.. I haven't gotten that to
work and I am wondering if anyone can help.

my config:

I have a phone on port 1



and the following vlans

interface 1
no lacp
exit
vlan 150
name "general"
untagged 3,6,8-12,14,16-20,24-25,27,29,32,35,37-39,41
tagged 1,31,50
exit
vlan 3
name "phones"
tagged 1,50
exit

[Kell van Daal]

Is VLAN 150 the VLAN the PC needs to use for data? If so, you need to untag port 1 for vlan 150 and keep it tagged for vlan 3.

vlan 150
untagged 1
vlan 3
tagged 1

This should do the trick.
Hope this helps.