HPE Community
Switches, Hubs, and Modems
1752766 Members
5233 Online
108789 Solutions
New Discussion юеВ

Re: How can i port forward packets from one vlan to another?

 
ljshan
Occasional Contributor

тАО02-10-2009 06:26 AM

тАО02-10-2009 06:26 AM

How can i port forward packets from one vlan to another?

I have a Procurve 2650 switch and created two vlans. Now i have enabled ip routing so any packet can travel from one vlan to another. But I want to port forward (i.e. NAT'ed) my vlan #1's packets to vlan #2. Is that possible to configure that on the Procurve 2650 switch?
0 Kudos
2 REPLIES 2
Evert Goor
Trusted Contributor

тАО02-10-2009 07:19 AM

тАО02-10-2009 07:19 AM

Re: How can i port forward packets from one vlan to another?

2560 is just a switch with some routing options. So the answer is "no". For more detailed routing you need a full blown router.
0 Kudos
Olaf Borowski
Respected Contributor

тАО02-10-2009 04:36 PM

тАО02-10-2009 04:36 PM

Re: How can i port forward packets from one vlan to another?

2650 does basic routing between vlans if you enable it but doesn't support NAT. You need an external device like the ProCurve 7000dl router that could do that for you.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.