Switches, Hubs, and Modems
1748136 Members
3598 Online
108758 Solutions
New Discussion юеВ

Re: How to config redunacy between 2 msm760

 
SOLVED
Go to solution
Srinivasalu.r
Advisor

How to config redunacy between 2 msm760

we have 2 msm 760 devices,how to config redunanacy between this two devices,
can any one helps us to resolve this issue..
5 REPLIES 5
Pieter 't Hart
Honored Contributor

Re: How to config redunacy between 2 msm760

Pieter 't Hart
Honored Contributor

Re: How to config redunacy between 2 msm760

it seems to be called "controller Teaming"

http://cdn.procurve.com/training/Manuals/MSM7xx-MCG-Apr10-5998-0308-v54.pdf
Redundancy and failover support: A ontroller team provides for service redundancy in case of failure. If one of the controllers in a team becomes inoperative (due to network
problems, hardware failure, etc.), its APs will automatically migrate to another controller in the team allowing for continuation of services.
Pieter 't Hart
Honored Contributor
Solution

Re: How to config redunacy between 2 msm760

see page 7-5 of the document.
Controller teaming : Creating a team
Srinivasalu.r
Advisor

Re: How to config redunacy between 2 msm760

thanks for the reply,i got very use full info..

once i configure teaming,then if i want to configure guest users access thro web authentication which port i have to use,can i use internet port for this,b'coz usualy we use LAN port for guest users web authentication...

can any one pls suggets on this.....
Pieter 't Hart
Honored Contributor

Re: How to config redunacy between 2 msm760

teamed controller should not behave other than single controller?

lan port connect to wireless devices
internet port connects to protected network.

If you allready have things working, you only need to team the controllers.

- User connects using wireless to the guest lan
- authenticates
- and is granted access through the msm to the protected network.

.