Switches, Hubs, and Modems
1748140 Members
3761 Online
108758 Solutions
New Discussion

Static ARP on Procurve Switches

 
Alessandro Baldoni
Occasional Contributor

Static ARP on Procurve Switches

We are planning the installation of an active/active firewall on our network (WatchGuard).
The installation guide states the we need to setup a static arp entry on the switch the cluster is connected to.
Is there any way to do this on a 2824?
Also, do we really need to do it?

Thank you for your help.
1 REPLY 1
Tijl van der Steeg
Valued Contributor

Re: Static ARP on Procurve Switches

I don't think you can do it on a 2824

You can try increasing mac-age and arp-age values though. But that might not be a proper solution.