HPE Community
Switches, Hubs, and Modems
1826907 Members
3205 Online
109705 Solutions
New Discussion

Voltaire InfiniBand With OEL

 
AZayed
Super Advisor

‎11-03-2010 11:55 AM

‎11-03-2010 11:55 AM

Voltaire InfiniBand With OEL

Dears,
Good day,

We have two Voltaire InfiniBand 4X DDR 24P Internal Managed Switch with 2 servers connected to this switch. I installed the driver and now when I write ifconfig I can see ib0 and ib1 on each server. When I login to the switch console I can see the ports up "Green". My issue is how can I configure them in private network with tape drive?

Every time I give ib0 an IP address the system lose it's default route and it will not be accessed by eth0.

If you have any best practise or how to or technical user guide I will be thanks full.

Regards
Success seems to be connected with action. Successful people keep moving. They make mistakes, but they don't quit.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.