hpux-10.20 driver for lan card

[EMILIO ARIAS_1]

I've a 9000 K series. How can i add a driver in my hpux-10.20 kernel for a HP-PB 10/100Base TX card(btlan)? Thanks in advance.

[A. Clay Stephenson]

The lan drivers are found on Disk 1 of any Applications CD set.

[Pete Randall]

It's probably already available and simply needs to be include into the kernel. Run SAM > Kernel Config > Drivers and find btlan in the list. Include it in the kernel and rebuild.


Pete

[rick jones]

Keep in mind that on a good day, going downhill with a tail wind, the HP-PB 10/100 BT card was at best a half-speed card. It was slower even than an HP-PB FDDI card "crippled" with a 1500 byte MTU.

If you have any performance requirements for the interface, you are much, Much, MUCH better-off with the HSC 10/100 BT card.

[EMILIO ARIAS_1]

Thanks to all . Indeed the driver was in "Application disk one"

[EMILIO ARIAS_1]

Thanks to all . Indeed the driver was in "Applications disk one"

[EMILIO ARIAS_1]

Thanks to all . Indeed the driver was in "Applications' disk one"

[EMILIO ARIAS_1]

Thanks to all