*so sory for my english - thr text was translateby google Greetings. I ask for advice, I'm already desperate. I bought a HP Microserver Gen8 - I have it in my hands with ilo and bios versions higher than in the last SPP for microserver gen8 - P03093_001_spp-Gen8.1-SPPGen81.4 and with oddities when loading: it sees a USB stick or not. There are no errors in the ILO. iLO 2.81 Jul 27 2022 Intelligent Platform Abstraction Data 0.00 Intelligent Provisioning 1.74.2 Redundant System ROM J06 11/02/2015 Server Platform Services (SPS) Firmware 2.2.0.31.2 System Programmable Logic Device Version 0x06 System ROM J06 05/21/2018 System ROM Bootblock 02/04/2012 I decided to update the entire FW online, updated the IP for this to 174 - as a result, the iP offered FWs the same as SPP. I installed ESXI, but on the second reboot server cant boot from the stick and ISO on ILO, no possibility to log in to IP (F5 and F10). Rolled back everything (bios, ilo) to the latest versions of SPP - did not help, lowered the IP to 170 - did not help (It should be noted that all attempts to download from a USB flash drive or from iso to ILO were accompanied by tambourines - reset to default, reboots, de-energization). I update the ILO and IP to the last version, was able to install the ESXI stick onto the usb again, configured the VM, turned off the server on power, turned it on and again it cant boot/ As a result, I have - I can only go into the BIOS by F9 and ILO working, does not see the bootable USB flash drive and the ISO-shniki connected by ILO, immediately switches to PXE (boot oreder is correct).   ... View more