HP Router MSR20-11

[ivan561]

How to do port forwarding on this router?

[AlexGrigorescu]

Hi Ivan

There is a simpe way to do this using "NAT internal servers".

You can find all the required information in Chapter 6 (Layer 3 - IP Services Configuration Guide) subchapter 7 (NAT configuration) of the configuration guide.

Say you have ethernet 0/0 connected to the Internet with IP address x.y.z.t assigned.

Your LAN computers are on a subnet: 192.168.1.0 / 24

Your WEB server is 192.168.1.2

The simple way to do the port forwarding is:

<router> system-view

[router] interface ethernet 0/0

[router-Etherner0/0] nat outbound

[router-Etherner0/0] nat server protocol tcp global x.y.z.t 80 inside 192.168.1.2 80

The nat server command is explained in the command reference manual and the configuration guide.

Hope it helps.

Regards,

Alex