Hi,
I am using MP-BGP/MPLS/L3VPN/LDP/RSVP-TE
I am running the HP Network Simulator and trying to route a static route to a VPN through an MPLS TE tunnel but it does not work.
ip route-static vpn-instance A 1.2.3.4 24 tunnel 1
dis bgp routing vpnv4
Network---------Next Hop
*> 1.2.3.4/24----0.0.0.0
* i 1.2.3.4/24---192.168.1.1
However, if I create a tunnel policy and prefer tunnel 1, then apply this tunnel policy to a VPN it routes ALL VPN traffic through the specified tunnel.
Is it not possible to static route a VPN through a tunnel?
