1950 IRF Firmware Upgrade

[MarkosV]

Hi,

I have 4 HP 1950s in a production IRF an I want to upgrade the members firmware from 7.10.R3208P16 to 7.10.R3506P11

Is it as simple as uploading the filrmware through the web interface and having the Device->IRF->Advanced Settings-> Device auto update option to "ON"?

Is there any specific reboot requence needed ot anything else to take care?

Thanks!

[akg7 · Accepted solution]

Hello,

Please check in release notes of 7.10.R3506P1 if ISSU upgrade from 7.10.R3208P16 to 7.10.R3506P11 is compatible or not.

https://h10145.www1.hpe.com/downloads/DownloadSoftware.aspx?SoftwareReleaseUId=28915&ProductNumber=JG960A

Start upgrade from slave and after upgradation of slave switch over as master then do upgrade on new slave.

You can refer below link. I know you are doing in GUI but steps might be similar:

https://community.arubanetworks.com/blogs/esupport1/2019/05/09/how-to-perform-in-service-software-upgrade-issu-on-fixed-ports-switches-which-are-in-irf-stack

Thanks!