Disable MSTP SNMP messages for specific interfaces (1920)

[Dunky]

How do I disable MSTP SNMP messages for specific interfaces?

I have the following interace configuration:

interface GigabitEthernet1/0/10
description End User Client
port access vlan 60
undo enable snmp trap updown
undo enable log updown
loopback-detection enable
stp edged-port enable
port-security max-mac-count 1
port-security port-mode autolearn
port-security intrusion-mode disableport-temporarily
port-security mac-address security aaaa-aaaa-aaaa vlan 60

but I get the following in the log each time the port goes up/down...

%Oct 17 07:15:57:017 2016 SWITCH23 MSTP/6/MSTP_FORWARDING: Instance 0's port GigabitEthernet1/0/10 has been set to forwarding state.
%Oct 17 07:15:57:018 2016 SWITCH23 MSTP/6/MSTP_FORWARDING: Instance 1's port GigabitEthernet1/0/10 has been set to forwarding state.

Globally, I have ""stp bpdu-protection" set.

I dont want to disable the MSTP messages globally as these are very useful for the uplinks etc., I just dont need them on the interfaces with PC;s/phones etc connected.

Any help would be most welcome.