Web and Unmanaged
1748195 Members
3543 Online
108759 Solutions
New Discussion

Re: HP 1810 8g Multiple VLAN Single Port + Vmware ESX

 
davad
Occasional Visitor

HP 1810 8g Multiple VLAN Single Port + Vmware ESX

Hi

 

I would like to set two VLANs in my 1810 as this:

 

VLAN ID 1 Defaut is setted up like all port to exclude

 

VLAN 1 ID 100 (LAN)

 

port 1 untag (esx port)

port 2 exclude (WAN port VLAN 2)

port 3 untag (LAN PC)

port 4 untag (LAN PC)

port 5 untag (LAN PC)

port 6 untag (LAN PC)

port 7 untag (LAN PC)

port 8 untag (LAN PC - Managed port)

 

 

 

VLAN 2 ID 200 (WAN)

 

port 1 untag (esx port)

port 2 untag (WAN port VLAN 2)

port 3 exclude

port 4 exclude

port 5 exclude

port 6 exclude

port 7 exclude

port 8 exclude

 

 

First problem I cannot set port 1 as untag in both VLANs.

 

 

After this I would like to manage traffic between LAN and WAN in esx host with single ethernet port with Sophos Astaro firewall with 2 virtual network with WLAN ID's.

But the problem is that I don't know if the problem in the configuration is in switch or esx configuration because with this configuration but setting port 1 in VLAN 1 as untag and port 1 in VLAN 2 as tag I'm only able to serf and see firewall in virtual machines in esx and not in phisical pc's connected to ports 3 to 8.

 

Thanks for your help.

 

2 REPLIES 2
Richard Brodie_1
Honored Contributor

Re: HP 1810 8g Multiple VLAN Single Port + Vmware ESX

"First problem I cannot set port 1 as untag in both VLANs."

 

No, you won't be able to do that; you will have to figure out how to manage multiple VLANs within the VMware virtual switch and tag one or both of them. Then you can deliver them to the individual VMs tagged or untagged on single or multiple interfaces, as you wish.

davad
Occasional Visitor

Re: HP 1810 8g Multiple VLAN Single Port + Vmware ESX

Hi

 

Thanks for your reply.

 

If I try to untag lan network and tag wan network in hp switch and after tag only wan virtual network in vmware it's ok for you?

 

It can be work?