problem HP V1900 Switch!

[sanek200]

tell me how to reset the HP V1900 Switch to its factory settings, no web?

[Fred_Mancen_1]

You just have to connect to the switch using console, reboot it and then you need to enter the command reset.

Regards.

[lasha2]

I connected to switch using serial cable with VT100 emulation program, but when i press Control, Shift and - keys (like described here: https://h20564.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=4177615&docId=emr_na-c03101578) it doen't work. can't enter to safe mode.

can someone help me?

[lasha2]

I solve this problem, i'll write it here, maybe it would be usefoull for someone

U must, not only press but also HOLD (Control, Shift and -) for some seconds

[MateusBuogo]

Hi,

You will need to use the console or connect to the switch using TELNET or SSH

You must enable CLI mode. To enable CLI mode you must type "_cmdline-mode on"

You will need to enter the password Jinhua1920unauthorized (v1920) or 512900 (v1910)

You need to execute the reset saved-configuration command

I hope I have helped.

Regards