VLAN configuration routing issue.

[Anthony Pansera_2]

I have a new HP V1910 24g PoE

VLAN 1 ports 1-23  192.168.1.2 ports 1-23 tagged

VLAN2 port 24  10.28.1.10  tagged

route addedc 0.0.0.0  0.0.0.0  nexthop 10.28.1.1 on vlan2

gateway 10.28.1.1 cisco 1800

cannot ping 10.28.1.1 from anything on lan or from vlan 10.28.1.10

want all internet traffic routed through switch to internet, adding wifi which will be on vlans at a later date.

Cannot get to internet.

Any Help appreciated

Anthony

P.S. this thread has been moved from Routing > LAN Routing to switching > Web and Unmanaged. - HP Forum moderator

[Vince_Whirlwind]

You probably need those ports to be "untagged", not "tagged".

They should only be "tagged" if the device connected to that port is also "tagging" its frames.