CPQTeamMP - 434 Error

[Scott Stidham]

I'm getting the 434 errors in the SysLog on a WS03 server (x64) and the LAN connection continually dropping. I have the following installed:
CPQTEAM: driver v8.8.0.0 7/19/06
Team member #1: NC7170 driver v8.9.1.0 3/27/07
Team member #2: NC7782 driver v10.42.0.0 7/22/07

The only way to get it back on the network is to disable/enable the Primary Team in device manager. I read HP Forums Thread ID 816989 but it references older drivers. Does the fix described in this ThreadId apply here as well?

Thank you,
Scott

[Rune J. Winje]

Both the NICs are covered by the same NC-series Network driver and NCU (Network Config Util aka "Teaming driver") - so they should be the same version.

The NIC and NCU drivers you list are not the latest version (latest is from december 07). Also check if you have the latest NIC firmware.

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=407737&taskId=135&prodTypeId=329290&prodSeriesId=407735〈=en&cc=us

If problems upgrading try complete removal of drivers prior to installation of newest drivers.



Cheers,
Rune