Proliant ML110 Reinstall does not find network card

[Raymond Nock]

I had to reinstall the SBS after some software issues. Unlike the factory completion of the install process, the reinstall fails in the setup process with a message that the network adapter was not correctly installed.
At this point the drivers have not loaded onto the server and seaching for drivers, reinstall or updating fails to successfully load the network drivers. Trying to update through device manager, re-booting have all failed. Of course you can't connect to internet to download drivers because you have no network card. The network card comes with motherboard so finding out the model, types is difficult as well. Any body got a solution?

[frank vandebergh]

you will need to download the drivers from the hp site. You'll probably need the marvell broadcom drivers or intel drivers, and also install the chipset drivers.
If you post your HP P/N we can tell you which drivers you need, then you'll need to download them from another pc.

[Raymond Nock]

Thanks for your assistance. I found another server that had the drivers in the hpdrivers folder and used those. All is working well.