HPE Community
Windows Server 2003
1819818 Members
3303 Online
109607 Solutions
New Discussion юеВ

Server 2003 ASR on Proliant ML110 G3 with SATA RAID Array

 
Tony Gibson
New Member

тАО12-01-2005 03:09 PM

тАО12-01-2005 03:09 PM

Server 2003 ASR on Proliant ML110 G3 with SATA RAID Array

Has anyone tried to run ASR on a Proliant ML110 G3 with a SATA RAID array ?

Booting from the Windows Server 2003 CD you have to add the SATA driver array by pressing the F6 key but after you do that there is no way to go back & press the F2 key to run the ASR Option.
0 Kudos
3 REPLIES 3
Ivan Ferreira
Honored Contributor

тАО12-01-2005 10:57 PM

тАО12-01-2005 10:57 PM

Re: Server 2003 ASR on Proliant ML110 G3 with SATA RAID Array

There is enough time to press F6 and F2. Just press them when prompted.

http://www.firestreamer.com/fsrm/asr.asp
http://www.informit.com/articles/article.asp?p=174367&seqNum=7&rl=1
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
Tony Gibson
New Member

тАО12-02-2005 01:17 PM

тАО12-02-2005 01:17 PM

Re: Server 2003 ASR on Proliant ML110 G3 with SATA RAID Array

Ah ok i was installing the driver first. Will try it on Monday by pressing them both at once.

Thanks Ivan will let you know
0 Kudos
Tony Gibson
New Member

тАО12-05-2005 12:18 PM

тАО12-05-2005 12:18 PM

Re: Server 2003 ASR on Proliant ML110 G3 with SATA RAID Array

Ivan That worked a treat !
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.