Microserver Gen10 plus V2 - no drivers/firmware updates posted

[mr_vaughn]

Seems there is no Drivers of firmware updates for the V2 plus Gen10 Microserver.
How Do I get the latest BIOS and updates?

https://support.hpe.com/connect/s/product?language=en_US&tab=driversAndSoftware&kmpmoid=1014673551&view=grid

[Suman_1978]

Hi,

Thats a good catch, but I am not sure why its not coming up there.
When you search with server name in the Drivers tab, it does come up.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics

[mr_vaughn]

This helped thanks

This is a work around to find the needed drivers and some of the updates.. Note I had to spend over 2 hours searching on the VROC RAID configuration and drivers which are not listed here in this link.

having the page properly fixed will help solve the issue not jsut for me but all other IT admins that need those resources

[Sunitha_Mod]

We are pleased to hear that the issue has been resolved. Additionally, we would like to thank you for your valuable feedback, which we will forward to the relevant team. 

[mr_vaughn]

If the link I posted does not wirk still is the issue resolved?
Also did you see the comment about the intel VROC driver which are ket to installing the OS?

I am sure there are many wasted hours on the HPE Support teams and end purchasers trying to install and setup to use this nice Microserver.

[ESXI8]

Can you please provide the link again? Having the exact same issue with same exact server.

[Suman_1978 · Accepted solution]

Hi,

Looks like the issue is resolved and now the drivers are coming up when that server is selected.

https://support.hpe.com/connect/s/product?language=en_US&cep=on&kmpmoid=1014673551&tab=driversAndSoftware

VROC.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics

[WiFriendly]

Hi all!

Here is the solution to the issue.

1. Reset the BIOS settings to the defaults.
2. Temporarily change storage mode to the AHCI/SATA
3. Reboot the machine
4. Change storage settings back to the VROC RAID.
5. Create VROC RAID per your specs.
6. Start Windows installation from scratch.
7. Press F6 and supply cp060020.exe as a driver (don't forget to unpack it first and put it on the iLo or USB stick).

[OK1VVT]

Amazing, it really helped