Posted to: ProLiant Servers (ML,DL,SL)
15m ago I have a DL360 Gen 10 that is part of a 2 node VSAN Cluster.There was a power failure in the computer room this weekend and the duel port 10 GB NIC isnt showing up on one of the servers.I have seen this before and powering off the server and unpluggi...
Posted to: Servers - General
17m ago Hello All,The R/T3000 G5 I am trying to find out is there a way to remotely power on and off the actual UPS. I have the mgmt card installed in the UPS but it is only the old 100MBits version of the card. I tried to move the jumper in the back and it... Posted to: Your questions about the HPE Support Center website
5 hours ago Hello,i am not able de to create new case (my first HPe case) i have this message : HPE Please contact your contract administrator, and reference error code GT1.Regards Posted to: ProLiant Servers (ML,DL,SL)
50m ago Hi all,I can't find on HPE Support Portal site the EOSL of DL560 Gen10.I found this date on a document = 11/01/2023 but I'm not sure it's the good one.==> https://support.hpe.com/hpesc/docDisplay?docLocale=en_US&docId=a00135948en_usThanks for help Posted to: MSA Storage
Saturday Hi,We have installed a new storage HPE MSA 2060. the storage server has two controllers A&B and each controller has 4 nics(8 nics in total). and each NIC is configured with an IP. so the two controllers have 8 IPs in total.We're are trying to connect... Posted to: MSA Storage
7 hours ago I have a MSA 2060 FC device. Currently loaded with SSD drives, i wanted to build a second disk array using some spare HDD's. When i went to build the second array it flagged that i need a license to achieve this. Can someone confirm if the correct li...
Posted to: Software - General
3 hours ago Moved to HPE Storage Networking - Switches Posted to: HPE Storage Networking - Switches
3 hours ago I want to have my OS update for the 2 HPE switches with part no Q9D36A. Can anyone guide me on how to get it updated? Posted to: StoreVirtual Storage
2 weeks ago HelloWe have a failed storage system on our P4300G2 cluster. I have removed it from the cluster. it still shos up on the CMC but if i cannot see any way to completely remove it to be re-imaged and re-added. There is no repair system option, if i r... Posted to: Servers - General
a week ago Hello everyone.I am a computer scientist, I have had a problem for some time with an HPE dl300 gen 9 server: the server crashes after several hours of operation and each time, I have to restart it to get it working again.Thank you in advance for your...
